克魯勃NBU 30 PTM防水裝配膏

詳細內容：產品基本信息： 型號：STABURAGS NBU 30 PTM 英文名稱:KluberSTABURAGS NBU 30 PTM 粘度等級：NLGI 品牌/產地：克魯勃，德國 包裝規格及價格：1.2KG/1200 25KG/21600 類型：耐水裝配潤滑脂 寶貝描述： STABURAGS NBU 30 PTM裝配潤滑脂 說明：STABURAGS NBU30 PTM是裝配潤滑脂含有固體潤滑劑。它是抗水和可防止摩擦腐蝕（微動腐蝕）。它已被證明有效的在戶外應用濕度高。 應用：STABURAGS NBU30 PTM是適合作為脂裝配使用應用集成的滑動間隙配合。應用范圍包括冷熱水閥門和水龍頭，滑道（特別是在填補機），閥軸和氣缸指南。該產品可因此，作為一個密封脂。在此外，它是合適的潤滑導軌，螺栓，主軸和螺絲，例如鐵路轉向架組件。STABURAGS NBU30 PTM是特別適用于外部鐵路車輛制動元件，如螺栓和棒等。STABURAGS NBU30 PTM裝配和拆卸faciliates在汽車ABS傳感器。 包裝規格：1.2千克30公斤桶 德語： STABURAGS NBU 30 PTM Lubricating and assembly grease Description: STABURAGS NBU 30 PTM is an assembly grease containing a solid lubricant. It is resistant to water and protects against tribo-corrosion (fretting corrosion). It has proven effective in outdoor applications subject to high humidity. Application: STABURAGS NBU 30 PTM is suitable as an assembly grease for applications incorporating sliding clearance fits. Applications include hot and cold water valves and taps, slideways (especially in filling machines), valve spindles and cylinder guides. The product can also be used as a sealing grease. In addition, it is suitable for the lubrication of slideways, bolts, spindles and screws, e.g. in railway bogie assemblies. STABURAGS NBU 30 PTM is especially suitable for external brake components of rail vehicles, such as bolts and rods. STABURAGS NBU 30 PTM faciliates assembly and disassembly of ABS sensors in vehicles. Application notes: Use the aerosol spray version of STABURAGS NBU 30 PTM for relubrication of railway brake parts where no grease nipple is incorporated. For optimum penetration into fine clearances we recommend spraying for at least 8 seconds. This will increase efficiency of brake rods in rail vehicles thus ensuring the longest maintenance intervals. When used for assembly and lubricating purposes we recommend the lubricant be lightly applied to the component surfaces via a lint free cloth, by hand, or by brush. Minimum shelf life: The minimum shelf life is approximately 60 months if the product is stored in its original sealed container in a dry place. The minimum shelf life for the product in aerosol canisters is approximately 36 months. Pack sizes: 50 g PE tubes 1.2 kg can 30 kg bucket 250 ml aerosol canister with extension tubeSTABURAGS NBU 30 PTM Assembly grease protecting against tribo-corrosion Good corrosion protection Excellent resistance to water even under outdoor conditions Approved by the company Knorr Bremse, N 12006-1.23